A second car: the Narevo Isken
BuildingA 1960s classic with a pushrod engine, a carburettor, points ignition and no computer at all.
- Idea
- Planned
- Designing
- Building
- Testing
- Released
AutoSandbox is in early access, and this is what we're working on next. Plans can change, and we don't promise dates. Something you'd like to see? Tell us.
A 1960s classic with a pushrod engine, a carburettor, points ignition and no computer at all.
Click a part to see what you can do with it. Your instruments sit along the bottom of the screen or float where you put them, and you put one down before using your hands.
Every control within reach on a small screen, with one menu holding the buttons along the bottom. Comes with the easier controls.
Whether the engine starts, keeps running or stalls worked out moment by moment from the state of the car, including what happens when you unplug something with it running.
At Apprentice level, your mentor tells you what an experienced mechanic would notice about each reading you take, without giving the answer away.
A fresh first job that walks you through the workshop, including how to set up the road test: a hot day, a wet road, a cold start.
A healthy car with nothing wrong, to learn your way around, take readings and see what normal looks like.
Jumper leads you can connect between any two points and leave in place, then take off again.
Bridge the diagnostic terminals and read the stored codes from the lamp flashing on the dash, as on the real thing.
Spin the wheel on the machine, turn it by hand to each weight position and fit the weights yourself.
Every cylinder, pulley and fault with a voice of its own, louder as you lean in, and a mechanic's stethoscope to pick one out.
Turbocharged, with its modules talking over a CAN bus and an OBD2 diagnostic port for a scan tool.
Last updated 21 November 2026.